EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Collection Solar Demand Controller is a hugely successful photo voltaic controller suitable for off-grid solar programs. Based upon multiphase synchronous rectification technologies, it makes sure optimized Electrical power conversion and system stability for an array of photovoltaic (PV) applications.

Crucial Functions of your EPEVER Tracer AN Collection Controller
The Tracer AN series utilizes EPEVER Solar Demand Controller technologies for top-quality photo voltaic Power harvesting. Important capabilities include things like:

Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Highly developed MPPT Algorithm with >99% effectiveness.
Dual-Stage Charging for Increased battery everyday living.
Liquid crystal display Display screen with genuine-time info monitoring.
Several Load Regulate Modes together with handbook and timer.
Comprehensive Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Step-by-Action Guideline to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Assure all components are integrated: Tracer AN unit, temperature sensor, interaction cables, and person guide.
Confirm the design selection and voltage scores match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Select a perfectly-ventilated, dry site near the battery financial institution.
Secure the Tracer AN controller using the furnished mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Often observe correct basic safety protocols and make sure the procedure is run off ahead of connecting elements.

Step 1: Hook up the battery terminals for the charge controller (good to positive, adverse to destructive).
Action two: Hook up the solar panel array to the PV enter terminals.
Stage three: Connect the load terminals if employing a direct load relationship.
Action 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Energy on the controller by connecting the battery to start with.
Make use of the LCD display to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Handbook, timer, mild Regulate.
five. Monitoring and Details Logging
The Tracer AN Sequence supports genuine-time checking using the MT50 distant meter.
Knowledge may be logged by using the RS485 interaction port employing application such as Photo voltaic Station Computer.
Distant monitoring can be done With all the EPEVER WiFi module.
6. Troubleshooting Common Difficulties
Problem one: No Power Output

Look at battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Difficulty two: Above-Voltage Protection

Confirm the solar array’s voltage score.
Regulate process parameters if essential.
Difficulty 3: No Battery Charging

Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Series with MSR Technological innovation
The multiphase synchronous rectification technology assures:

Higher Effectiveness: Lessened Vitality losses during conversion.
Improved Trustworthiness: Stable functionality under variable hundreds.
More time Battery Lifestyle: Dependable and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification know-how is an Extraordinary option for optimizing solar More info power era and increasing battery life. By adhering to the above mentioned setup guidebook, people can ensure highest performance and system longevity.