EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is actually a really effective solar controller made for off-grid solar programs. Dependant on multiphase synchronous rectification engineering, it ensures optimized energy conversion and process stability for a wide array of photovoltaic (PV) apps.

Critical Options of your EPEVER Tracer AN Series Controller
The Tracer AN collection utilizes EPEVER Solar Charge Controller technologies for outstanding solar Strength harvesting. Critical functions consist of:

Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Sophisticated MPPT Algorithm with >ninety nine% effectiveness.
Twin-Stage Charging for Improved battery life.
LCD Show with genuine-time information checking.
Several Load Command Modes including handbook and timer.
In depth Digital Protections from overcharging, about-discharging, limited circuits, and reverse polarity.
Step-by-Action Manual to Organising the EPEVER Tracer AN Collection Controller
1. Unboxing and Preparing the Controller
Make certain all components are integrated: Tracer AN unit, temperature sensor, communication cables, and person guide.
Verify the design variety and voltage rankings match your solar panel and battery specifications.
two. Mounting the Charge Controller
Select a effectively-ventilated, dry area near to the battery financial institution.
Safe the Tracer AN controller using the delivered mounting brackets.
Retain right clearance for warmth dissipation.
3. Wiring the Solar Cost Controller
Caution: Usually adhere to proper protection protocols and make sure the method is run off right before connecting parts.

Action 1: Hook up the battery terminals on the cost controller (good to positive, destructive to adverse).
Stage two: Hook up the solar panel array to the PV enter terminals.
Stage three: Link the load terminals if using a immediate load link.
Step four: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Options
Electrical power on the controller by connecting the battery Read more initially.
Make use of the LCD Exhibit to navigate the configurations menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, light-weight Handle.
5. Checking and Information Logging
The Tracer AN Collection supports actual-time checking using the MT50 distant meter.
Knowledge may be logged by way of the RS485 communication port using program for example Photo voltaic Station Computer.
Distant monitoring is achievable Together with the EPEVER WiFi module.
6. Troubleshooting Widespread Problems
Challenge 1: No Electric power Output

Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern 2: Over-Voltage Defense

Validate the solar array’s voltage score.
Regulate program parameters if necessary.
Situation 3: No Battery Charging

Inspect PV wiring for continuity.
Verify MPPT configurations inside the menu.
Great things about the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification engineering makes sure:

Larger Performance: Decreased Electricity losses for the duration of conversion.
Enhanced Dependability: Steady performance below variable loads.
Extended Battery Life: Regular and exact charging profiles.
Conclusion
The EPEVER Solar Demand Controller with multiphase synchronous rectification technologies is undoubtedly an exceptional choice for optimizing solar power era and lengthening battery everyday living. By following the above setup guide, buyers can make sure greatest performance and method longevity.